Giving you everything you’d need to measure characteristics of the audio surrounding you, the i436 Microphone Kit from MicW includes a measurement microphone, a windscreen, a clip, a 6.6′ extension cable, a split cable (allowing you to monitor sound with any pair of 3.5mm-terminated headphones), and a mounting/carrying tube.
The microphone’s sensitivity and frequency response are calibrated at the factory before shipping, and thus, with this mic and a corresponding app, you can measure the SPL and frequency content of speech, instruments, live sound signals, and even the space surrounding you. With this kit, you should be able to acquire SPL and RTA readings with ease, doing so in a variety of places (mounted on your collar or on a tripod, for instance), and all whilst monitoring the sound on your mobile device.
i436 Professional Class 2 Microphone for iPad, iPhone and iPod touch
As an alternative to the internal microphone on your iPad, iPhone or iPad touch, consider using the i436 Professional Class 2 Microphone for iPad, iPhone and iPod touch from Mic-W. This calibrated measurement microphone complies with the IEC 61672 class 2 sound level meter standard. The sensitivity and frequency response is individually calibrated.
Windscreen for i436 & i456 Microphones
The Windscreen from Mic-W is designed to be attached to a Mic-W i436 or i456 microphone to effectively minimize wind noise during recordings.
Collar Clip for i436, i456 & i266 Microphones
The Collar Clip from Mic-W is designed to hold Mic-W’s i436, i456 or i266 microphone and attach to a shirt collar during audio recordings.
Extension Cable for i Series Microphones – 6.6′
The Extension Cable from Mic-W allows you connect your iPhone, iPod touch or iPad to your Mic-W i series microphone. Rather than plugging the microphone directly into the headphone jack, this extension cable gives you the freedom of using the microphone up to 6.6 feet away from your device.
Split Cable for i Series Microphones
The Split Cable from Mic-W is designed to be used with the Mic-W i series microphones. The male connector attaches to the headphone jack of your iPhone, iPod touch or iPad, while the two female ports on the other end allow you to connect the microphone as well as earbuds.
Aluminium Tube for i Series Microphones
The Aluminum Tube from Mic-W can be used as a standalone holder for a Mic-W i series microphone, or can be used with a tripod. The tube is outfitted with a standard 3/8″ screw and hole for the microphone. When you’re not using the microphone, you can even store it inside of the tube.
|Model: i436 Kit Specifications|
|Capsule diameter||7.0mm (can be calibrated)|
|Principe of operation||Pressure|
|Sensitivity(±4dB)||-44 dB (6.3mV/Pa)|
|S/N ratio||More than 62dB|
|Impedance||Less than 2.2k|
|Power Source||Plug-in power capability, Plug and play|
|Connector||3.5mm 4-Pole headset interface|
What’s In The Box
- Collar or Lapel Clip
- 2m extension cable
- Split Cable
- Carrying case and Stand mount
- 2.5V to 48V phantom power
- T-Split Adapter